Ubiquiti Unifi Access G2 Reader PRO

Second-generation NFC card reader and intercom.

Unlock using an NFC card or UniFi Identity mobile app
Doorbell for unlock with video of visitor and two-way intercom
Video works at ADA-compliant mounting height
PIN unlocking on the screen
Connects to UniFi Access Hub using PoE
IP55 rain resistance (-10 to 45° C)

Produsent

Support

Datasheet

Dimensions

160 x 40.4 x 40.55 mm (6.3 x 1.59 x 1.6″)

Integrated Camera

✓

NFC Card & Keyfob Access

✓

PIN Access

✓

Mobile Unlock

✓

Two-Way Intercom & Doorbell Access

✓

NDAA Compliant

✓

UL 294 Level

Destructive attack: Level I Line security: Level I Endurance: Level I Standby power: Level I

Weatherproofing

IP55

Weight

136 g (4.8 oz)

Enclosure Material

Polycarbonate, glass

Mount Material

Aluminum alloy

Mounting

Wall, gang-box mount (Included) Angle mount, junction box (Optional)

Indoor and Outdoor Use

Yes

Ambient Operating Temperature

Device: -30 to 45° C (-22 to 113° F) Display: -10 to 45° C (14 to 113° F)

Ambient Operating Humidity

5 to 90% noncondensing

Networking Interface

(1) GbE RJ45 port

Connectivity

BLE 4.2 NFC

Power Method

PoE UL 294 Power-limited Class 2 PSU UL 60950-1/62368-1 LPS/PS2 PSU

Max. Power Consumption

Supported Voltage Range

48V DC

ESD/EMP Protection

Air: ±15kV, contact: ±8kV

Sensors

Proximity sensor

Display

Size

120 mm (4.7″) diagonal

Screen Technology

Capacitive touch

Luminance

480 nits (Typical)

Screen Orientation

Portrait

Resolution

1280 x 286 px

Microphone

✓

Speaker

✓

LEDs

R/G/B/W/Amber Learn More

Button

(1) Factory-reset

NFC Frequency

13.56 MHz

NFC Read Range

< 30 mm (1.18”)

NFC Technology

ISO/IEC 14443A / 14443B / 15693 / 18092 (Ecma 340) MIFARE Classic / MIFARE DESFIRE Sony FeliCa™ (ID only) NFC Forum tags T1T, T2T, T3T, T4T and T5T

PoE Cabling Requirements

Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site. The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.

UL 294 Statement

Compliance with IEEE 802.3 specifications was not verified as part of UL 294. The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.

CAN/ULC-60839-11-1 Grade

Grade assignment: I

Certifications

CE, FCC, IC, SRRC, UL 294, CAN/ULC-60839-11-1

Document number, and issue date and/or revision level

UA-G2-Pro/UA-G2-Pro-Black, V02

Management Application

Access

Software Information

The software version can be checked at https://unifi.ui.com